D-Max Canopy Fitout

A Journal of our Travels

A Journal of our Travels

The shelving was cut from 12mm plywood.
Carpet is marine carpet from Bunnings stick down with Kwik Grip. Tried the spray on the top shelf, and found I needed to use a lot. The edges were stapled all around.
The top shelf is supported by Unistrut 41mm heavy duty. The light weight Unistrut would probably have sufficed.
The shelf on the left hand side was stuck down with liquid Kwik Grip and aluminium angle around each edge.

Image
Image
Image
Image

The centre divider is 12mm plywood and helps support the top shelf to avoid any sag.

Image
Image

Both sides have a divider and shelf.
The left side has 4 FronRunner boxes and the right side has the fire pit.

Stacks Image 1538
Stacks Image 1542

The right side has the battery and electrical panel with DC-DC charger, switches for lights and power sockets (SB50 and Powerpoles).
There is room for the generator if needed, although we don't normally take it with us. We have it as a temport backup as the car charging for the trainer is now wired up yet.

Image

Sponsored By Therese Elsey Photography

Therese Elsey Photography